SPEL manufactuers wide range of Mfd-Capacitors for use in Fans, Motors, Washing-machines, Air-conditioners, Kitchen-chimney, Lighting-Fixtures, etc. The range of Mfd-Capacitors manufactured by SPEL comes in various construction as per need of customer, and applications. Construction features Polymeric cans cyclindrical and Square, Aluminum Cans (Cyclindrical & Oval), M.S. Cans, with wide range of terminations and safety features as per requirement. Application wise these range of Mfd-Capacitors are classified, and manufactured confirming to required National and International Standards.
These AC MFD Range of capacitors manufactured at SPEL Comply to IS 2993 / IEC - 60252 (For Motors), IS 1709 (For Fans), IS 1569 (For Lighting Fixtures) and relevant International Standards. Available voltage range from 250 VAC to 600 VAC, Capacity ranging from 0.5 microfarad to 600 microfarad for use in Lighting Fixtures, Motors, Pumps, Fans, Compressors. Aircon, Washers, Refrigerators, Generators / CVTs / UPS/ Invertors. Available in Plastic or Aluminium Can construction. Safety device explosion proof construction available. Dual rating capacitors also available.
In confirmity with ISS: 1709 reuirements, for use in 50Hz~60Hz AC Power system.
Specific voltage range is available ranging from 370VAC~440VAC,
Capacitance value ranging from 1.0 mfd ~ 5.0 mfd,
Available in Cyclindrical and Rectangular Polymeric Cans, and cyclindrical aluminium cans.
Features dry construction with low loss self-healing MPP design.
Available in Wire and Tag terminations.
In confirmity with ISS : 2993, CNS 4327, JIS 4908, IEC 252 requirements for use in 50Hz~60Hz AC power system.
Specific voltage range is available ranging from 370VAC~660VAC,
Capacitance value ranging from 6.0 microfarad ~ 300 microfarad for Start & Run application. Dual rating combinations also available.
Available in encapsulated, Polymeric Container, jelly filled in Aluminum Container. Single Faston, Double Faston Tinned Terminals Compatible for snap on type lugs, Wire terminations
Features compact dimension, light weight, low dissipation factor, Self-healing MPP desgn, Explosion proof construction in Aluminium can..
Mounting options available for both polymeric (Optional Plastic stud M8 max. torque = 5 Nm) and Aluminum constructions..
In confirmity with ISS: 1569 reuirements, for use in 50Hz~60Hz AC Power system.
Specific voltage range is available ranging from 110VAC~250VAC,
Capacitance value ranging from 3.15 microfarad ~ 60 microfarad.
Available in Cyclindrical and Rectangular Polymeric Cans, and cyclindrical aluminium cans.
Features dry construction with low loss self-healing MPP design, Explosion proof construction in Aluminium Can.
Available in Wire and Tag terminations.